Paused a joke at 9:47 pm when the walk-in ticked up to 42°F, because nothing says comic timing like recalibrating a data logger and logging a corrective action. Anyone else kill a crowd to verify sanitizer at 200 ppm before finishing the story?
I stash a test strip in my phone case and cue a quick call-and-response while I dip it — 5 seconds to verify ‘200 ppm’ and paste a pre-written corrective-action line, then finish the bit without dead air. Small caveat: if your logger can chirp early, set it so you’re not pausing at ‘9:47 pm’ when the walk-in creeps to ‘42°F’; that work for you?
Set your logger to ping at 40°F so you get a heads-up before it hits “42°F” — , those 9:47 pm mid-bit pauses kill. I use a watch buzz + a text shortcut for the corrective action (“walk-in adjusted, temp rechecked; sanitizer 200 ppm verified”) so it’s two taps and I finish the joke. Food Code ref if you need it: https://www.fda.gov/food/fda-food-code — do you want a quieter alert setup?
Worth trying? NFC sticker on the mic: tap to timestamp the “walk-in” 42°F blip.
Piggybacking on @cjohnson72’s timestamp idea, I tied my sensor to a tiny amber stage light; when it blips, I run a 10‑second “pickles or pastrami?” vote so I can peek at the walk‑in and jump back in on the beat. If you’ve got a repeatable pause between bits, park the check there — like a sneeze break for the cooler. Got a spot you can hide a quick glance without losing rhythm?
@cjohnson72’s light cue is slick, but I’ve had better luck giving the logger a “snooze”: set a 90–120 second alert delay and showtime quiet hours so brief door swings don’t nuke the bit, and only break if it persists. Curious what model you’re.